CNC-100

The workpiece coming from the enterance conveyor is taken from the conveyor by the help of the automatic work piece transfer unit and left on automatic unbalanced measurement unit.

Workpiece which is put onto the measuring unit manually or automatically is tightened with the bench command by a workpiece tightening equipment and the bench starts measurement. Bench completes the measurement in 8-10 sec. After first measurement, balanced part of the workpiece is positioned under automatic drilling unit and fixed by help  of hydraulic clamps. Balanced part of the fixed workpiece interferes to workpiece (with x-y-z directions) by the automatic piercing unit,  taking ISO 1940-G6,3 or specially defined permit tolerance standards as basis or aiming permanent unbalancing tolerances and using the balancing method known as decreasing method and making linear and circular interpolation movement, and completes the balancing process within 10-15 sec. 

Workpiece clamping equipment releases the workpiece after measurement. The workpiece is removed from the machine according to the approval or denial status or  work cycle is repeated. All this process takes 40-50 sec approximately.