Portable Balancing Device VectorBal 400
Product Description
Balancing on the machine, without removing the rotor.
The VectorBal 400 is a portable measuring and balancing device for balancing rotating parts such as fans, pumps, electric motors, compressors and machine tool spindles where they operate. The vibration sensors are attached magnetically at the bearing points, and the laser reference sensor reads the speed and the phase angle. The device guides the operator step by step on screen and calculates the correction weight and its position in 1 or 2 planes.
Technical Specifications
Application Areas
- Industrial fans and extractor fans
- Pumps and compressors
- Electric motors and generators
- Machine tool spindles
- Crushers, mills and drums
- Building ventilation fans
Why the VectorBal 400?
Key features of the VectorBal 400:
- Balancing without dismantling. The rotor is balanced in its own bearings at operating speed; there is no need to dismantle, transport and reinstall the machine.
- Wide speed range. 120 – 80,000 rpm.
- Up to 6 measuring channels. 2 vibration channels as standard; optionally expandable to 6 channels.
- Vibration analysis during balancing. Overall vibration and the FFT spectrum are shown on the same screen as the balancing steps; during run-up and run-down, speed-dependent amplitude and phase plots reveal resonance ranges, so that balancing is carried out away from resonance.
- Assessment to standards. Vibration severity is assessed against the limit values of ISO 10816-3, and the permissible residual unbalance is calculated to ISO 21940-11 (formerly ISO 1940).
- Reporting. Every job is saved in the machine file; the PDF balancing report with initial and final measurements, vector diagram and spectra is transferred to a computer via USB-C.
- Built for field use. Dust-resistant housing, colour touchscreen, rechargeable battery for at least 8 hours of operation, 2.4 kg weight, rugged carrying case.
- Multilingual interface. The menu language is selected on the device; it is available in many languages, including German, English and Turkish.
- Optional advanced analysis. Envelope spectrum for detecting bearing damage, time signal and cross-channel phase measurement; can also be added later.
If you would prefer our team to carry out the balancing instead of buying a device: On-Site Balancing Service
Scope of delivery
- VectorBal 400 measuring and balancing device (built-in rechargeable battery)
- 2 accelerometers, magnets for flat and curved surfaces, 2 × 2.9 m cables
- Optical laser reference sensor, holder, reflective tape, 2.9 m cable
- USB-C computer cable (1 m)
- Charging adapter
- Rugged carrying case (shoulder strap and 2 hand straps)
Product Gallery